Return to home page

Suggested Lobster Kits

The new WESMAC hulls are probably the biggest innovation to hit the world of lobster boat design since the turn of the century. Above the waterline, the WESMAC looks like any other New England lobster boat. Below the waterline is a modified v-bottom, rimmed by a flat chine that gives the WESMAC true planing hull characteristics combined with the sea-keeping ability of the true “Downeasters”. The full keel and streamlined sternpost and skeg offer the necessary protection for the propeller and rudder. What the owner gets is a hull that is designed to be driven easily, have good speed characteristics with low fuel consumption and be very stable for fishing and/or cruising.



Wesmac Jarsulan 4

38' LOBSTER SUGGESTED KIT
HULL Price
38’ Fiberglass $38,346.00
White gelcoat -0-
Riechold Hydrex 100 Vinylester resin skin coat $1,732.00
Polyester resin laminate -0-
Solid fiberglass laminate (no core) -0-
Double up stringers & laminate in engine bed area & carry stringers thru main bulkhead forward $2,090.00
Durakore plank (balsa) stringers in lieu of spruce $635.00
Vacuum bagged 1” foam core main & lazarette bulkheads in lieu of marine plywood $1,693.00
TOP
Lobster style $19,925.00
White gelcoat -0-
Polyester resin laminate -0-
Balsa & Airlite core -0-
MISC.
Engine: Will provide quote upon request P.O.A.
Install engine, shaft, drip pan & drive train  $24,832.00
Ace flex mount system  $2,145.00
Installed 316L S.S. skeg shoe $3,465.00
Installed 316L S.S. rudder w/ rudder step & packed box $4,822.00
Top installation  $7,854.00
Installed PVC secondary spray rails  $3,265.00
Installed PVC quarter guards $1,908.00
Installed 4 oval bronze backed zincs $1,243.00
Installed each side- copper bonding strap $3,641.00
Installed fuel tanks approx. 300 gals $6,352.00
Installed 3/4” vacuum bagged rope locker bulkhead $1,386.00
Foam core engine room shelves port & starboard $5,082.00
Installed dual ram power steering quadrant including:
2 S.S. mounting brackets & backing plates $5,082.00
Visor shipped loose $1,386.00
TOTAL KIT PRICE $136,884.00


42' LOBSTER SUGGESTED KIT
HULL Price
42’ Fiberglass $46,807.00
White gelcoat -0-
Riechold Hydrex 100 Vinylester resin skin coat $2,541.00
Polyester resin laminate -0-
Solid fiberglass laminate (no core) -0-
Triple up stringers & double up laminate in engine bed area & carry stringers thru main bulkhead forward $3,234.00
Durakore plank (balsa) stringers in lieu of spruce $808.00
Vacuum bagged 1” foam core main & lazarette bulkheads in lieu of marine plywood $2,310.00
TOP
Lobster style $30,781.00
White gelcoat -0-
Polyester resin laminate -0-
Balsa & Airlite core -0-
MISC.
Engine: Will provide quote upon request P.O.A.
Install engine, shaft, drip pan & drive train  $25,271.00
Ace flex mount system  $2,139.00
Installed 316L S.S. skeg shoe $3,465.00
Installed 316L S.S. rudder w/ rudder step & packed box $4,822.00
Visor Shipped Loose $1,386.00
Top installation  $8,692.00
Installed PVC secondary spray rails  $3,264.00
Installed PVC quarter guards $1,908.00
Installed 4 oval bronze backed zincs $1,243.00
Installed each side- copper bonding strap $3,641.00
Installed fuel tanks approx. 600 gals $12,061.00
Installed 3/4” vacuum bagged rope locker bulkhead $1,386.00
Foam core engine room shelves port & starboard $5,082.00
Installed dual ram power steering quadrant including:
2 S.S. mounting brackets & backing plates $5,082.00
TOTAL KIT PRICE $165,923.00
**Note: misc prices are for installation of under 1000hp engines.


46' LOBSTER SUGGESTED KIT
HULL Price
46’ Fiberglass $59,900.00
White gelcoat -0-
Riechold Hydrex 100 Vinylester resin skin coat $2,887.00
Polyester resin laminate -0-
Solid fiberglass laminate (no core) -0-
Triple up stringers & double up laminate in engine bed area & carry stringers thru main bulkhead forward $3,234.00
Durakore plank (balsa) stringers in lieu of spruce $935.00
Vacuum bagged 1” foam core main & lazarette bulkheads in lieu of marine plywood $2,310.00
TOP
Lobster style $32,340.00
White gelcoat -0-
Polyester resin laminate -0-
Balsa & Airlite core -0-
MISC.
Engine: Will provide quote upon request P.O.A.
Install engine, shaft, drip pan & drive train  $25,271.00
Ace flex mount system  $2,139.00
Installed 316L S.S. skeg shoe $3,465.00
Installed 316L S.S. rudder w/ rudder step & packed box $4,822.00
Visor shipped loose $1,386.00
Top installation  $8,692.00
Installed secondary spray rails  $3,264.00
Installed quarter guards $1,908.00
Installed 4 oval bronze backed zincs $1,243.00
Installed each side- copper bonding strap $3,641.00
Installed fuel tanks approx. 600 gals $12,061.00
Installed 3/4” vacuum bagged rope locker bulkhead $1,386.00
Foam core engine room shelves port & starboard $5,082.00
Installed dual ram power steering quadrant including:
2 S.S. mounting brackets & backing plates $5,082.00
TOTAL KIT PRICE $181,048.00
***Note: misc prices are for installation of under 1000hp engines


50' LOBSTER SUGGESTED KIT
HULL Price
50’ Fiberglass $78,886.00
White gelcoat -0-
Riechold Hydrex 100 Vinylester resin skin coat $3292.00
Polyester resin laminate -0-
Solid fiberglass laminate (no core) -0-
Triple up stringers & double up laminate in engine bed area & carry stringers thru main bulkhead forward $4,042.00
Durakore plank (balsa) stringers in lieu of spruce $1,878.00
Vacuum bagged 1” foam core main & lazarette bulkheads in lieu of marine plywood $2,887.00
TOP
Lobster style (4 piece) one side open
1. House top
2. Windshield surround
3. Wash rail, for peak & cuddy cabin
4. Stern rail
$54,862.00
White gelcoat -0-
Polyester resin laminate -0-
Balsa & Airlite core -0-
MISC.
Engine: Will provide quote upon request P.O.A.
Install engine, shaft, drip pan & drive train  $33,322.00
Ace flex mount system  $2,137.00
Installed 316L S.S. skeg shoe $5,082.00
Installed 316L S.S. rudder w/ rudder step & packed box $6,583.00
Installed PVC quarter guards $1,908.00
Installed 4 oval bronze backed zincs $1,276.00
Installed each side- copper bonding strap $4,042.00
Installed two (2) fuel tanks approx. 500 gals each $20,212.00
Installed 3/4” Airlite core vacuum bagged rope locker bulkhead $1,502.00
Installed dual ram power steering quadrant including:
2 S.S. mounting brackets & backing plates $5,604.00
TOTAL KIT PRICE $227,515.00
***Note: misc prices are for installation of under 1000hp engines


54' LOBSTER SUGGESTED KIT
HULL Price
54’ Fiberglass $105,682.00
White gelcoat -0-
Riechold Hydrex 100 Vinylester resin skin coat $3,696.00
Polyester resin laminate -0-
Solid fiberglass laminate (no core) -0-
Triple up stringers & double up laminate in engine bed area & carry stringers thru main bulkhead forward $4,042.00
Durakore plank (balsa) stringers in lieu of spruce $2,217.00
Vacuum bagged 1” foam core main & lazarette bulkheads in lieu of marine plywood $2,887.00
TOP
Lobster style (4 piece) vacuum bagged (one side open)
1. House top
2. Windshield surround
3. Wash rail, for peak & cuddy cabin
4. Stern rail
$54,862.00
White gelcoat -0-
Polyester resin laminate -0-
Balsa & Airlite core -0-
MISC.
Engine: Will provide quote upon request P.O.A.
Engine installation, shaft, drip pan & drive train  $33,322.00
Ace flex mount system  $2,145.00
Installed 316L S.S. skeg shoe $5,082.00
Installed 316L S.S. rudder w/ rudder step & packed box $6,583.00
Installed PVC quarter guards $1,908.00
Installed 4 oval bronze backed zincs $1,270.00
Installed each side- copper bonding strap $4,158.00
Installed two (2) fuel tanks approx. 500 gals each $20,212.00
Installed 3/4” Airlite core vacuum bagged rope locker bulkhead $1,502.00
Installed dual ram power steering quadrant including:
2 S.S. mounting brackets & backing plates $5,660.00
TOTAL KIT PRICE $255,228.00
***Note: misc prices are for installation of under 1000hp engines


Prices are effective as of November 12, 2012, and are subject to change without notice.
Orders are taken on a first come - first serve basis. Please call for production schedule times.



Home  |  Details & Pricing  |  Boats for Sale  |  Site Map

WESMAC  |  P.O. Box 56, 158 Blue Hill Road  |  Surry, ME. 04684
Phone: 207-667-4822  |  Fax: 207-667-3620  |  sales@wesmac.com